Mk1 Scirocco Center Console Q's

[mk1scirocco at yahoo.com (Mark Hausler)]

--- Neal Tovsen <nealtovsen@yahoo.com> wrote:
> 
> > A good description? maybe- Mine in my 81 is held
> in
> > place by a screw right before the shifter (between
> > the
> > shifter and e-brake)
> 
> Ok... I think I see how this screw *should* work,
> but
> it doesn't in my car. I replaced the rusty plate for
> the shift lever from a junkyard part...I wonder if
> the
> mk2's had a slightly different plate because the
> center console hole doesn't want to line-up properly
> to the plate. Too bad I threw out the original one!
> Oops.
> 
> > and then two screws on the
> > sides
> > right where it meets the dash. Those top ones on
> > mine
> > screw into the plastic a/c housing (looks kinda
> like
> > a
> > dealer install job- but I know it is original on
> my
> > car)
> 
> Two screws on EACH side (i.e. 4 total) or one on
> each
> side (2 total)? Are there any that are supposed to
> screw into the floor at all?
> 
> > did that help?
> 
> Yeah! More info than I had before. Thanks Mark!
> 
> Neal
> 


Total of three screws!



=====
mark hausler
'81 scirocco s
'03 20AE GTI

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com