Rear axle bushings

[Joe.Doty@lcnetwork.com (Joe Doty)]

Word.  I did my a-arm bushings almost the exact same way.

Joe Doty
IT/Development
joe@lcnetwork.com=20

> -----Original Message-----
> From: Allyn [mailto:amalventano@sc.rr.com]
> Sent: Thursday, January 30, 2003 11:13 AM
> To: Calimus; Scirocco ML
> Subject: Re: Rear axle bushings
>=20
> umm, been there, done that (in my carport, no press):
> tools needed:
> http://scirocco.dhs.org/vw/pics/0-allyn/images/021002-165640-Z10.jpg
> how to arrange them:
> http://scirocco.dhs.org/vw/pics/0-allyn/images/021002-165759-Z10.jpg
> almost done:
> http://scirocco.dhs.org/vw/pics/0-allyn/images/021002-165907-Z10.jpg
> done:
> http://scirocco.dhs.org/vw/pics/0-allyn/images/021002-165936-Z10.jpg
> final shot showing various stages of completion:
> http://scirocco.dhs.org/vw/pics/0-allyn/images/021002-170751-Z10.jpg
> as far as ride is concerned, not even noticable when just going
straight.
> you will notice the rear is stiffer in turns, and may induce oversteer
> when
> you werent used to it before (yes, doing this mod even put the rieger
> sideways when i wasnt expecting it).
> hth
> Al