aftermarket seat info

[sfwilliams@comcast.net (Scott F. Williams)]

As a general rule, the race seats (not the reclining street seats) are
thinner on the bottom. And, if they are side mounts (not all are), you could
straddle something. You'd have to actually measure to make sure that it
would clear at the height you want.
--
Scott F. Williams
NJ Scirocco nut
'99 Subaru Impreza 2.5 RS
Mazda 323 GTX turbo "assaulted" vehicle
Golf GTI 16v "rollycar"
ClubVAC: "Roads found. Drivers wanted."

-----Original Message-----
From: scirocco-l-admin@scirocco.org
[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Allyn
Sent: Sunday, January 26, 2003 1:07 PM
To: scirocco list
Subject: aftermarket seat info


    need info on what the bottom of an aftermarket seat looks like.
specifically, can one be installed straddling the center rail of a scirocco
(i.e. where the shifter/e-brake was), and still sit at the same height. i'm
guessing aftermarket seats dont have many parts in the center, and are
probably thinner at the bottom.
    i would get a momo carbon shell or something similar, if that plays into
the thickness at all.
thx in advance for info
Al

Allyn Malventano, ETC(SS), USN
87 Rieger GTO Scirocco 16v (daily driver, 180k, rocco #6)
86 Kamei Twin 16V Turbo Scirocco GTX ('it has begun', rocco #7)
86.5 Occo 16v Trailer (dotting 'i's across the country, rocco #8)
87 Jetta 8v Wolfsburg 2dr (daily driver, 270k, 0 rattles, original clutch,
driveshafts, wheels :)


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l