Digifant on a 16v question

[aculda@cogeco.ca (Adrian C.)]

well how knows ..
i might even propose at cincy :o
now that would be interesting ..
LOL

----- Original Message -----
From: "Neal Tovsen" <nealtovsen@yahoo.com>
To: "Adrian C." <aculda@cogeco.ca>; "Joe Doty" <Joe.Doty@lcnetwork.com>;
<scirocco-l@scirocco.org>
Sent: Wednesday, January 22, 2003 5:22 PM
Subject: Re: Digifant on a 16v question


> > and also just found my bum ass a GF ....
>
> And you think you'll get your project done WHEN?? Add
> 12-18 months to that estimate. :)
>
> Neal
>
> --- "Adrian C." <aculda@cogeco.ca> wrote:
> > actually ...
> > im using a Webber TB right now
> > not really using it .. since i have the car stored
> > for the winter
> > and also just found my bum ass a GF .... FINALY ....
> > and been spending 99% of my time with her ;)
> > things are finaly lookin up ... ad from the looks of
> > it
> > i might make it even to Cincy this year !!!
> > WHOHO !!!
> >
> > ----- Original Message -----
> > From: "Neal Tovsen" <nealtovsen@yahoo.com>
> > To: "Adrian C." <aculda@cogeco.ca>; "Joe Doty"
> > <Joe.Doty@lcnetwork.com>;
> > <scirocco-l@scirocco.org>
> > Sent: Wednesday, January 22, 2003 4:30 PM
> > Subject: Re: Digifant on a 16v question
> >
> >
> > > That is exactly what I would do! Actually, I seem
> > to
> > > remember that some people put a BOV on there
> > without
> > > doing any welding. Maybe post on the G60 technical
> > > forum of VW Vortex for more info...
> > >
> > > Neal
> > >
> > > --- "Adrian C." <aculda@cogeco.ca> wrote:
> > > > actually my plan before hand with the G60 TB was
> > to
> > > > take out the recirc
> > > > valve and shaft, weld up the holes
> > > > weld a flange for the BOV on there :)
> > > > and voila a perfect beginer turbo setup :)
> > > > ----- Original Message -----
> > > > From: "Joe Doty" <Joe.Doty@lcnetwork.com>
> > > > To: "Neal Tovsen" <nealtovsen@yahoo.com>;
> > > > <scirocco-l@scirocco.org>
> > > > Sent: Tuesday, January 21, 2003 12:03 PM
> > > > Subject: RE: Digifant on a 16v question
> > > >
> > > >
> > > > > The G60 throttlebody won't work well without
> > > > forced
> > > > > induction though. It has a port for the G60's
> > > > boost
> > > > > recirculation (basically a wastegate)
> > built-in.
> > > > You
> > > > > can use the existing TB though.
> > > >
> > > > I used the 16v TB for a while, but I got tired
> > of
> > > > changing rubber
> > > > inlets.  I was using ones off of A2 16v's, and
> > they
> > > > kept splitting open.
> > > > The G60 TB has that stupid recirc valve, but I
> > cut
> > > > it off and had the
> > > > hole welded up and now I've got a beautiful
> > round
> > > > inlet.  It's totally
> > > > worth it IMO :)
> > > >
> > > > > The fuel lines and fuel filter can be a PITA
> > > > because
> > > > > the fittings for the rail are on the passenger
> > > > side. I
> > > > > ran new ones from the fuel tank b/c the car
> > was a
> > > > > basket case when I got it. Joe, what did you
> > do?
> > > >
> > > > I kept the existing filter and hacked up the
> > stock
> > > > (CIS) rubber lines.
> > > > They're barbed underneath.  From there I had a
> > > > barbed fitting on the
> > > > return line, and I found a straight barbed banjo
> > > > fitting for the fuel
> > > > filter.  Then I ran some aeroquip 250 psi line
> > > > to/from the rail. A la
> > > >
> > <http://www.calpoly.edu/~jdoty/pics/turbo/digi1.jpg>
> > > >
> > > > > SNsTuning.com will cut you a chip for any
> > > > application.
> > > > > Danny and Sam rock!
> > > >
> > > > Werd! SNS rocks.
> > > >
> > > > Joe
> > > >
> > > > _______________________________________________
> > > > Scirocco-l mailing list
> > > > Scirocco-l@scirocco.org
> > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > > >
> > >
> > >
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> > now.
> > > http://mailplus.yahoo.com
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com