2.0 TB

[Rabbit16v@attbi.com (Rabbit16v)]

The 2.0L TBs are not the same.  Some are the same size but have other
differences and there is atleast one with a restrictor in the primary port.
Some are one piece also unlike the 16v and G60 (same base TB).  HTH!

Dave
----- Original Message -----
From: <JoshuaA.Conner@VerizonWireless.com>
To: <scirocco-l@scirocco.org>
Sent: Saturday, January 18, 2003 10:12 AM
Subject: 2.0 TB


> *******NEW TOPIC******
>
> Is the Throttle body on a 2.0 16v the same exact size as it is on the 1.8
> 16v?  I need to know, I am starting to design an intake manifold for the
> 16v.  I've started some cad drawings, and eventually it will resemble a
> Shrick VR6 manifold.
>
>
> It is the same size.  It differs in that version has a throttle position
> sensor.  As a side note i saw in an old European car that the late great
> Velocity Tuning once sold a T/B that had the secondary bored 3mm larger
with
> a corresponding bigger "flap".  Anyone got any knowledge about these.  Any
> one try boring theirs out?  Seems simple enough eh?
>
> Joshua C.
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l