Project ?'s for the List

[aculda@cogeco.ca (Adrian C.)]

1. NOPE
2. YUP .. check link ...
 http://forums.vwvortex.com/zerothread?&id=487621&postid=4260372#4260372
3.yup and a bit over that in torque
4. get a few spare transmisions :P ( went through 2 in a month !!! diff
exploded =| )
BTW ..
thats almost the replica of my set up
even though my PG is stil sittin at Dauns :(
and right now using the JH til it goess BOOM !!!
and as for the rest im usin a K26 Rev8  ( a la 944T )
audi 5KTQ Wastegate with a bleeder valve set to 19 Psi :eek:
Huge Custom FMIC, 2.5" ploished aluminum Turbo piping ( almost done )
and a nice and huge webber TB, same BOV , same chip, Digi1 with #42's, 3.5
Bar Fpr
and right now im on my 3rd transmision ...
this one lasted the longest yet ... 3.5 months ... cuz the car is stored for
winter ...
als this is a ACN tranny ( nice and long gears )
right now the car is riding on 195/50-14's ( canadian tire specials )
and very soon the 16" Motegy MR7s' ... gun metal nonethe less :)

----- Original Message -----
From: "Krazy Horse" <nightmare16v1988@hotmail.com>
To: <scirocco-l@scirocco.org>
Sent: Thursday, January 09, 2003 1:28 AM
Subject: Project ?'s for the List


> I just want to make sure that I am on the right track and I have a few
> questions.
>
> First off, my project is well underway. I am swapping in a g60 into my
MKII
> Scirocco 16v. I am converting the engine into a turbo beast.
>
> On the engine I have an T3 with a Tial Hybrid wastegate and 1.1bar spring.
> The fuel injectors are Accel #30 and I am going to be using a 3.5bar FPR.
> The engine management is Digi I and I have a Stage IV SNs chip installed.
I
> aquired a 1g Eclipse BOV to use, which I will probably mount to the lower
> port on my g60 TB.
>
> As for the tranny, I am using my stock 2Y with a Sach's clutch kit and a
> lightened flywheel. I am replacing the CVs while I am at it.
>
> On to suspention & brakes...Bilstein struts with Neuspeed Sport springs.
The
> brakes are upgraded to Corrado 11" rotors and calipers. I have 15" Corrado
> Bottlecap rims with Khumo 195/50-15.
>
> So my questions are:
>
> 1. Am I over/under killing anything?
> 2. Is the TB an okay place to mount my BOV? (It has a nice port just
asking
> for it!)
> 3. Will this setup get me into the 200whp mark?
> 4. What should I change?
>
>
> -Craig
> "Nightmare" '88 16v (PG-T Proj.)
> "Calypso" '91 Golf GL (Daily Driver)
>
>
>
>
> _________________________________________________________________
> Protect your PC - get McAfee.com VirusScan Online
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l