16v TDC settings

[peter at thescirocco.com (peter)]

-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of Brian McGarvey
Sent: Friday, December 26, 2003 4:36 PM
To: scirocco-l@scirocco.org
Subject: 16v TDC settings

So folks,
I dont have my ahem *several* bentleys..
Im in need of some info.
16v TDC settings
cam2cam looks good.  - O line up just fine

now looking at the flywheel.
there is a hack and a dot. I am assuming the following
the Dot is mechanical TDC and the hack is 6degrees btdc
It should be lined up with the mark on the front of the cam pulley with
the valve cover mark. while the motor is sitting at zero degress (dot)
on
the flywheel.
Im assuming this is correct. Unless otherwise noted.
brian


Yes that's correct.


Peter
302.832.8989
http://thescirocco.com