flex-a-lite wiring help

[scirocco16v_1986 at yahoo.com (Jeffrey Lowe)]

Chris,

Did you try my suggestion? I'll post it again for you
in case you deleted it:

The best thing I can recommend is to make yourself a
jumper wire to trigger the low speed relay manually at
input lead 86 with +12vdc to see if the fan kicks
on(do this test with engine off). If it kicks on then
you know your low speed relay, ground, and +12vdc on
lead 30 is OK. If that checks out then measure the
voltage coming from the fan switch(red/blk low temp
wire) to lead 86 to see if there is a trigger voltage
when your engine reaches the low speed temp(engine
running of course).

Prove the above and get back to us.

Good luck,

Jeff Lowe


--- Chris Venturini <cventuri@digipen.edu> wrote:
> yeah so uhhhh.....that didnt work. The wiring is
> correct according to this diagram
> >http://home.epix.net/~rhock99/pics/fan7.jpg< All
> ground wires connect and attach to the battery, and 
> I now have a new relay.  The fan has been tested, 
> and works. Any ideas what to next?
> 
> -chris

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com