Front Axle Nut Size

[ternil@union.edu (ternil@union.edu)]

Also, don't forget a substaintial grasp of choice four letter vocabulary... 
This is quite possibly the most often overlooked and most essential part of 
any bearing job. The ability to string them together to form long, yet 
eloquent epithets is also a plus...

LT
87 8v - SOLD (thanks julie!)
92 SLC Raddo - faster than a bounced check


Quoting ATS - Patrick Bureau <txrocco@sbcglobal.net>:

> that is because I weight less than the required Torque necessary to unlock
> and lock the nut in place (grin)
> 
> Btw the clutch and tranny are in today :)
> 
> 
> ATS - Patrick Bureau - txrocco@sbcglobal.net
> 
> 
> =>-----Original Message-----
> =>From: brian_wagner@sbcglobal.net [mailto:brian_wagner@sbcglobal.net]
> =>Sent: Saturday, April 26, 2003 2:48 PM
> =>To: Julie Macfarlane; txrocco@sbcglobal.net; esinger@northstate.net;
> =>scirocco-l@scirocco.org
> =>Subject: Re: Front Axle Nut Size
> =>
> =>
> =>No Julie Patrick's kit usually contains one thing
> =>
> =>my phone number LOL
> =>
> =>
> =>Just ask him how manyI have changed for him.
> =>
> =>Brian
> =>----- Original Message -----
> =>From: "Julie Macfarlane" <juliemac57@hotmail.com>
> =>To: <txrocco@sbcglobal.net>; <esinger@northstate.net>;
> =><scirocco-l@scirocco.org>
> =>Sent: Saturday, April 26, 2003 2:14 PM
> =>Subject: RE: Front Axle Nut Size
> =>
> =>
> =>> Pat wrote:
> =>> >forgot;
> =>> >
> =>> >bandaids
> =>> >stiches @ home kit
> =>> >911 telephone # (grin)
> =>> >yeah more beer
> =>>
> =>> Julie's addition.
> =>> >Woman to show you how to do it right.
> =>>
> =>>
> =>>
> =>>
> =>> Julie Macfarlane
> =>> Menlo Park Research & Development
> =>> Internet Application Developer
> =>> www.menloparkrandd.com
> =>> www.montgomeryweb.org
> =>> Amsterdam NY
> =>>
> =>>
> =>>
> =>>
> =>>
> =>> >From: "ATS - Patrick Bureau" <txrocco@sbcglobal.net>
> =>> >To: "Eric D Singer" <esinger@northstate.net>,"Julie Macfarlane"
> =>> ><juliemac57@hotmail.com>,<scirocco-l@scirocco.org>
> =>> >Subject: RE: Front Axle Nut Size
> =>> >Date: Sat, 26 Apr 2003 14:06:02 -0500
> =>> >
> =>>
> =>> >
> =>> >
> =>> >ATS - Patrick Bureau - txrocco@sbcglobal.net
> =>> >
> =>> >
> =>> >=>-----Original Message-----
> =>> >=>From: Eric D Singer [mailto:esinger@northstate.net]
> =>> >=>Sent: Saturday, April 26, 2003 10:49 AM
> =>> >=>To: ATS - Patrick Bureau; Julie Macfarlane; scirocco-l@scirocco.org
> =>> >=>Subject: Re: Front Axle Nut Size
> =>> >=>
> =>> >=>
> =>> >=>Okay,  I hope my shopping list is complete:
> =>> >=>Torque wrench
> =>> >=>Breaker Bar
> =>> >=>30mm socket
> =>> >=>cotter pin
> =>> >=>tie rod splitter bar
> =>> >=>12 pack of beers
> =>> >=>1 carton of cigarettes
> =>> >=>
> =>> >=>Eric Singer
> =>> >=>
> =>> >=>----- Original Message -----
> =>> >=>From: "ATS - Patrick Bureau" <txrocco@sbcglobal.net>
> =>> >=>To: "Eric D Singer" <esinger@northstate.net>; "Julie Macfarlane"
> =>> >=><juliemac57@hotmail.com>; <scirocco-l@scirocco.org>
> =>> >=>Sent: Saturday, April 26, 2003 11:37 AM
> =>> >=>Subject: RE: Front Axle Nut Size
> =>> >=>
> =>> >=>
> =>> >=>> do not use the torque wrench to unlock nuts man, ya going to damage
> =>it
> =>> >=>> breaker bar to take it off, torque wrench to tighten it down/
> =>> >=>>
> =>> >=>>
> =>> >=>> ATS - Patrick Bureau - txrocco@sbcglobal.net
> =>> >=>>
> =>> >=>>
> =>> >=>> =>-----Original Message-----
> =>> >=>> =>From: scirocco-l-admin@scirocco.org
> =>> >=>> =>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Eric D Singer
> =>> >=>> =>Sent: Saturday, April 26, 2003 10:02 AM
> =>> >=>> =>To: Julie Macfarlane; scirocco-l@scirocco.org
> =>> >=>> =>Subject: Re: Front Axle Nut Size
> =>> >=>> =>
> =>> >=>> =>
> =>> >=>> =>I was going to buy a really long torque wrench, somewhere
> =>> >=>between 2 and
> =>> >=>3
> =>> >=>> =>feet long.  Would that be good enough to get the nut off without
> =>> >=>> =>have to buy
> =>> >=>> =>a separate breaker bar?
> =>> >=>> =>
> =>> >=>> =>Thanks,
> =>> >=>> =>
> =>> >=>> =>Eric Singer
> =>> >=>> =>
> =>> >=>> =>----- Original Message -----
> =>> >=>> =>From: "Julie Macfarlane" <juliemac57@hotmail.com>
> =>> >=>> =>To: <esinger@northstate.net>; <scirocco-l@scirocco.org>
> =>> >=>> =>Sent: Saturday, April 26, 2003 10:55 AM
> =>> >=>> =>Subject: Re: Front Axle Nut Size
> =>> >=>> =>
> =>> >=>> =>
> =>> >=>> =>> IIRC 30mm.
> =>> >=>> =>> Get a breaker bar as well. Thats one tough nut to break.
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>> Julie Macfarlane
> =>> >=>> =>> Menlo Park Research & Development
> =>> >=>> =>> Internet Application Developer
> =>> >=>> =>> www.menloparkrandd.com
> =>> >=>> =>> www.montgomeryweb.org
> =>> >=>> =>> Amsterdam NY
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>> >From: "Eric D Singer" <esinger@northstate.net>
> =>> >=>> =>> >To: <scirocco-l@scirocco.org>
> =>> >=>> =>> >Subject: Front Axle Nut Size
> =>> >=>> =>> >Date: Sat, 26 Apr 2003 10:27:20 -0400
> =>> >=>> =>> >
> =>> >=>> =>> >I preparing to work on a front wheel bearing this weekend and
> =>I'm
> =>> >=>going
> =>> >=>> =>out
> =>> >=>> =>> >to buy a torque wrench and socket for the job.  Does anyone
> =>> >=>> =>know the size
> =>> >=>> =>> >of the front axle nut of an 84 Scirocco so I can buy the
> =>> >=>appropriate
> =>> >=>> =>> >socket?
> =>> >=>> =>> >
> =>> >=>> =>> >Thanks,
> =>> >=>> =>> >
> =>> >=>> =>> >Eric Singer
> =>> >=>> =>> >'84 8v Scirocco
> =>> >=>> =>> >Trinity, NC
> =>> >=>> =>> >www.eds-systems.com
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>>
> =>_________________________________________________________________
> =>> >=>> =>> STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> =>> >=>> =>> http://join.msn.com/?page=features/junkmail
> =>> >=>> =>>
> =>> >=>> =>>
> =>> >=>> =>
> =>> >=>> =>
> =>> >=>> =>
> =>> >=>> =>_______________________________________________
> =>> >=>> =>Scirocco-l mailing list
> =>> >=>> =>Scirocco-l@scirocco.org
> =>> >=>> =>http://neubayern.net/mailman/listinfo/scirocco-l
> =>> >=>>
> =>> >=>>
> =>> >=>
> =>>
> =>>
> =>> _________________________________________________________________
> =>> The new MSN 8: advanced junk mail protection and 2 months FREE*
> =>> http://join.msn.com/?page=features/junkmail
> =>>
> =>>
> =>> _______________________________________________
> =>> Scirocco-l mailing list
> =>> Scirocco-l@scirocco.org
> =>> http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 




-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/