16V PP & 8V Clutch

[slash2@mindspring.com (Scott Rose)]

It's got to work well,  Profesor nate in his 90 all motor corrado is
running that mated to a 2.0 20v and running 11's.  no problems yet





At 04:10 PM 9/9/02 -0400, you wrote:
>I use this setup on my built up 2l 16v since I'm running an 8v
transmission. No slippage at all. It's lasted through a LOT of hard abuse,
too. 
>
>Joshua
>
>
>
>Original Message -----------------------
>I used a 16v PP and 8v clutch on my 8v and it works more than fine, you
>wont be disappointed.  This setup will also give you some room for
>engine work and not having to worry about clutch damage as much.  This
>setup is also generally the cheapest route you can go, save for using
>stock 8v PP.
>
>-Adam
>
>-----Original Message-----
>From: scirocco-l-admin@scirocco.org
>[mailto:scirocco-l-admin@scirocco.org] On Behalf Of Sal Guzzo
>Sent: Monday, September 09, 2002 9:55 AM
>To: mark1GTI@yahoogroups.com; Scirocco List
>Subject: 16V PP & 8V Clutch
>
>Hi all,
>
>In regards to the aforementioned items, what PP and clutch can I use in
>a
>8V.  I have heard that 16V PP and 8V clutch will work.  Any
>ideas/suggestions?
>
>TIA
>
>Sal
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
>
Scott Rose
88 red 16v
78 "sky blue"
90 yellow g60(not too much left now)
Import R  "solid shift" linkages for VW A1 chassis