8v head help

[deadbolt@mindspring.com (S. Coleman)]

That port is for the "air-shroud" injectors.  Depends on what injectors you
are using.  Don't use the air shroud injectors and plug the hole off...
you'll be fine.  or use them and hook up a vacuum line.  Problem solved.
Chris
'88 16v Rocco
'78 8v Rocco
'80 Caddy
'92 SLC
'02 337 1.8T
'00 GTI VR6
----- Original Message -----
From: "Kervin" <kervinridgley@earthlink.net>
To: "List" <scirocco-l@scirocco.org>
Sent: Tuesday, October 22, 2002 10:23 PM
Subject: 8v head help


> I'm going to finish putting my engine back together tomorrow.  I'm
> putting on a hydro head onto a car that started out with a JH engine.
> There is a hose fitting on the JH head between the 3&4 injectors.  It
> looks like a little tube.  On the hydro head, there is no tube, just a
> hole where a tube could fit in.  I can't get the tube out of the JH head
> to put in the hydro.  I made a block off plate for the space.  Do you
> think that I will have any problems with this?  What is the tube for?  I
> think it is some kind of vent.  The GTI head I had didn't have a tube or
> hole, so if anyone is wondering, that's the difference between a GTI
> head and a JH.
> --
> Kervin
> 86 Scirocco 2.0 8v 4K+80%
> 88 Gti 1.8 16v needs some love
> 00 tt600
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>