[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Drive Flange Seals



half shafts gotta go.
need to get to the inside of the flange to remove the cap/seal, then use a
(special) puller to put tension on the flange in order to get the circlip out.
after that the flange slides off, the seal is a no-brainer.
Al

----- Original Message -----
From: "John Erickson" <ranahan@charter.net>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, October 22, 2002 10:39 AM
Subject: Drive Flange Seals


> I got me a leak.  Damn, I hate leaks.
>
> How hard is it to change drive flange seals on an AGB?
>  Can I do it without removing the half shafts?
>
> John
> 87 16v
> Long Beach
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l