throttle switch question

[jdbubb@ix.netcom.com (Dan Bubb)]

If the original CIS injection was kept while converting to the JH engine
then there is no place for the WOT switch to connect to. Keeping the
original CIS shouldn't cause other problems. The engine may not have
quite as much power at full throttle, but there shouldn't be any other
difficulties.

Ryan Ruggles wrote:
> 
> There's no wires going to the throttle switch on my 1.8l JH.  It was put
> into a 1982 rabbit LS that had a 1.7L.  IS it possible that they used the
> same original computer to run the 1.8L?  That may explain some of the other
> weird problems I have had.
> 
> Ry
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l