[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cleaning Fuel Injectors w/Brake Parts Cleaner?



Michael,

That was me who suggested the brake cleaner, glad it worked for you.

-Earl



----Original Message Follows----
From: "Leach, Michael" <michael.leach@lmco.com>
To: "'Kenneth & Georgianna Robinson'" <krobins2@twcny.rr.com>
CC: "'scirocco-l@scirocco.org'" <scirocco-l@scirocco.org>
Subject: RE: Cleaning Fuel Injectors w/Brake Parts Cleaner?
Date: Fri, 24 May 2002 10:31:28 -0400

no I don't think so but it does work pretty well...but now I see that one of
my injectors sprays much better than the rest

Michael Leach
LAMPS Integration and Test
Lockheed Martin Federal Systems
Owego, NY 13827
607-751-7542
FAX 751-6198
michael.leach@lmco.com



-----Original Message-----
From: Kenneth & Georgianna Robinson [mailto:krobins2@twcny.rr.com]
Sent: Friday, May 24, 2002 10:17 AM
To: Leach, Michael; 'Larry'
Cc: scirocco-l@scirocco.org
Subject: Re: Cleaning Fuel Injectors w/Brake Parts Cleaner?


Any particular brand & size can of brake parts cleaner?? Chlorinated or
Non-Chlorinated?? Thanks! Ken R.
----- Original Message -----
From: "Leach, Michael" <michael.leach@lmco.com>
To: "'Larry'" <rocco16v@netzero.com>
Cc: <scirocco-l@scirocco.org>
Sent: Friday, May 24, 2002 6:30 AM
Subject: RE: Cleaning Fuel Injectors w/Brake Parts Cleaner?


 > Problem Found!!!!
 >
 > you need to use  a *NEW* can of Parts Cleaner with lots of pressure...and
 > you get the pretty misting action....very impressive
 >
 > Michael Leach
 > LAMPS Integration and Test
 > Lockheed Martin Federal Systems
 > Owego, NY 13827
 > 607-751-7542
 > FAX 751-6198
 > michael.leach@lmco.com
 >
 >
 >
 > -----Original Message-----
 > From: Larry [mailto:rocco16v@netzero.com]
 > Sent: Thursday, May 23, 2002 7:30 PM
 > To: Leach, Michael
 > Subject: Re: Cleaning Fuel Injectors w/Brake Parts Cleaner?
 >
 >
 > You be right; not enough pressure.
 >
 > Larry
 > Senior Engineering Technician
 > GKN Aerospace Chem-tronics, Inc.
 > (yes, the same GKN that probably made your CV joints....)
 >
 > > I don't remember who it was that said they cleaned their injectors by
 > > spraying brake parts cleaner into the inlet but I tried this and 
nothing
 > > came out the end of the injector.  It all just came back out on the
inlet
 > > side.   I was really hoping to do this and see the misting pattern and
 > know
 > > that the injectors were fine.  What am I missing here?...do I need more
 > > pressure to make the injector mist?
 > > Michael Leach
 > >
 >
 > _______________________________________________
 > Scirocco-l mailing list
 > Scirocco-l@scirocco.org
 > http://neubayern.net/mailman/listinfo/scirocco-l
 >

_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l




_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com