Help identifying a FOX intake

[rfkellner@snet.net (Rick Kellner)]

Cory,
    There is a picture of the fox intake at the Scirocco.org site.  Just
follow the link from 'techprocedures' to the drop down list for 'Scirocco 2'
and the Audi 5000 TB conversion.  They show both the Fox and the stock
Scirocco.
    I have a Fox manifold that I will be putting on soon.  After discussing
it with a few people on the list that have done this conversion, I elected
to keep the fifth injector in the original location on the Fox manifold.
Unfortunately, this means a modification by the fire wall.  The injector
should be located near the cold start air valve and not moved to the end.
Also, there is very little material on the end to tap for the fifth
injector.   Rick.

http://www.scirocco.org/


----- Original Message -----
From: "Cory Langford" <cory.langford@icbc.com>
To: "scirocco" <scirocco-l@scirocco.org>
Sent: Friday, May 17, 2002 10:39 AM
Subject: Help identifying a FOX intake


>
> Well, I was going to spend time with the dremel and an old intake I have
> here to port it out for an A2 tb, but as luck would have it someone I
> know has offered me a free intake if I can find a fox one in the pipe he
> has in his garage (literally 30 or 40 intakes in there last time I
> looked).
>
> So the question is:  Can anyone tell me how I can identify a fox intake
> from a normal VW (I.E. rabbit, scirocco, etc.) intake quickly?
>
> Thanks
>
> --
> Cory Langford
> '86 turbo project
> '83 driver)
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>