Is the Oettinger head a solid lifter head?

[sfenton@amazon.com (Fenton, Shannon)]

Yes.
Yes.
Yes.

The Oettinger head flow is comparable to the ported 2.0. But the head
makes it power in its design, not its CFM.

It has a special intake and exhaust manifold. The intake manifold is
water warmed for more consistent intake charge and the exhaust manifold
bent tubular steel.

Ive got a really rough project page on Oettinger here
http://www.scirocco16v.com/oettinger_index.htm I can talk all day about
Oettinger.



Shannon

-----Original Message-----
From: Mike Blain [mailto:rept@qwest.net]=20
Sent: Friday, March 29, 2002 7:46 AM
To: scirocco-L@scirocco.org
Subject: Re: Is the Oettinger head a solid lifter head?


Can this be attached to a 2.0L block? would this help break the 180HP=20
limitation on normally aspirated engines?     Am I speaking with an=20
asscrack pipe?

Fenton, Shannon wrote:

> Yes.
>=20
> Shannon
> www.scirocco16v.com
> -----Original Message-----
> From: Dave Ewing [mailto:rabbit16v@prodigy.net]=20
> Sent: Friday, March 29, 2002 1:03 AM
> To: Scirocco List
> Subject: Is the Oettinger head a solid lifter head?
>=20
>=20
> Looking at the pics of the Oettinger head that someone was selling a=20
> while back made me wonder if they were solid or hydraulic.
>=20
> Dave
>=20
>=20
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org=20
> http://neubayern.net/mailman/listinfo/scirocco-l
>=20
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org=20
> http://neubayern.net/mailman/listinfo/scirocco-l
>=20
>=20
>=20



_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org http://neubayern.net/mailman/listinfo/scirocco-l