A1 gauge package

[mpeters6@rochester.rr.com (Marc Peterson)]

That 150 was for two gauge panels, 5 VDO gauges and three senders...seemed
about right to me...

Marc
----- Original Message -----
From: "Brian Dettling" <aa821@acorn.net>
To: "Scirocco list" <scirocco-l@scirocco.org>
Sent: Wednesday, March 27, 2002 2:38 PM
Subject: A1 gauge package


> Well, lets see how this sniping works?
>
> Anyway, I've got old two guage plastic panel that fits above stock guages
> (covers the cubbyhole).  I mounted voltmeter and an oil presure guage.
> Has the two 2 1/16" holes plus one small 1/8" hole for switch to allow
> voltmeter "on" for cranking or ignition off voltage measurement.
>
> I think ~$5 +$1 shipping is fair?  But, if someone will spend $150+ for
> Al....
>
> Speaking of which, if you want to replace the radio with gauges, VWs used
> to have a block off plate that would snap in to the DIN opening.  You can
> drill this out for gauges.  But know that VDO is > 2", more like 2 1/16" .
>
>
> RE:  Additonal LED in MKII
>
> Has anyone motivated found out if there is an output from the KE knock
> box that could be used (buffered?) to drive the upshift light?  Bentley
> shows a light if Fig 1-2 of Ignition, but I dunno if there is a pin for
> it (fig 5-2).  Would be neato and maybe even useful use of yellow arrow.
> Pin 11?
>
> Regards,
>
>  -- Brian
> D./OH
> How can you be in two places at once when you're not anywhere at all...
> Firesign Theatre
>
> q
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>