Replacing the black vinyl on the Deck and B-Pillar

[dan@angband.org (Lord Xenu)]

On Wed, Mar 27, 2002 at 12:42:45AM -0800, EUROROC II wrote:

> So I'm not done with my test and I can't give you my advise on how to 
> remove the old stuff and prep the area but I'm getting so many emails I 
> decided to get the roll and tell you all what I used.
> 
> It's made by Rubbermaid. the label reads as follow
> 
> 	Rubbermaid
> 	Con-Tact Brand
> 	Ultra Covering

Hrm.. not sure how con-tact paper is going to stand up to UV damage and
such.  When I replaced the vinyl on my 16v B pillars, I used a product
from 3M designed to protect the leading edge of aircraft wings from
abrasion damage.. go to Aircraft Spruce and search for "Leading Edge
Tape"  It costs some bucks, but it comes on a 100 foot by 6" wide
roll.  Luckily, I had some kicking around the hangar so it cost me nuthin.

Dan

-- 
It isn't pollution that's harming the environment. It's the impurities in
our air and water that are doing it.

		-- Dan Quayle