Front Wheel Bearings Revisited

[Larry" <rocco16v@netzero.com (Larry)]

Wonderful.  I just bought a press to do my front wheel bearings with and
it's a 12 ton.......this means my bearings will probably require 12.5T to
remove them......

Larry   sandiego16V

> Chris,
>
> I have done this 2 weeks ago.. and it took 12 ton pressure to remove the
> bearings from the Hub (thank you again brian for the 25ton press)
> I will write the pictugram tech note tomorow so you can take a look at
what
> your getting into.
> but count 20 mins per side to remove the assembly, and reinstall, and
about
> 30 mins per bearing to remove and press in if you never changed them like
> mine where (eh not bad 16 years on front bearing..lololol)
>
> ATS - Patrick