[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

DOn't you have to drill for an 8v install? was: Stock 16v lower stress bar

Subject: DOn't you have to drill for an 8v install? was: Stock 16v lower stress bar
From: rabbit16v@prodigy.net (Dave Ewing)
Date: Mon, 18 Mar 2002 02:27:54 -0800
References: <3C93D061.995BFC31@sympatico.ca> <3C95A18E.9F18B4D5@mindspring.com>

Yep!  But it is simple once you mount it to the frame horns, then you know
exactly where to drill!!

Dave


> John Erk wrote:
> >
> > I'm considering getting a  stock 16v lower stress bar from a friend(for
> > a good price) for my 85 8v. Is it sufficient, or should I save up for an
> > Autotech or Eurosport? It's only for street use. How hard is it to
> > install?
> > John
> >
>
>
> I thought there would be the need to drill two holes for the rear bolts.
> Is this true?
>
> TBerk
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l

References:
- Stock 16v lower stress bar
  - From: johnny.erk@sympatico.ca (John Erk)
- DOn't you have to drill for an 8v install? was: Stock 16v lowerstress bar
  - From: tberk@mindspring.com (T Berk)

Prev by Date: Brakes
Next by Date: A1 Topless bunny update and problems
Previous by thread: DOn't you have to drill for an 8v install? was: Stock 16v lowerstress bar
Next by thread: DOn't you have to drill for an 8v install? was: Stock 16v lower stress bar
Index(es):
- Date
- Thread