Master Cylinder question

[amalventano1@comcast.net (Allyn)]

ok, that makes much more sense now.
Al

----- Original Message ----- 
From: <dan@angband.org>
To: <scirocco-l@scirocco.org>
Sent: Thursday, March 14, 2002 6:13 PM
Subject: Re: Master Cylinder question


> On Thu, Mar 14, 2002 at 12:02:53PM -0600, ATS - Patrick Bureau wrote:
> > AL,
> > 
> > 16v Rocco MC 22,2mm Stroke, 17/15 Bore 
> > G60 noABS MC 22,2mm Stroke, 16/18 Bore
> > 
> > 16v MC Bore = 17/15 = 1.13
> > G60 MC Bore = 16/18 = 0.89
> > 
> > See.. same stoke, smaller bore = more pressure to brake pad than 16v MC.
> 
> Um.... NO!  They are both 22mm bore.  17/15 is NOT a fraction, it is the
> stroke of the forward chamber and the aft chamber of the MC..  17mm stroke
> front, 15mm rear.
> 
> Dan
> 
> 
> -- 
> 37% of your base are belong to IRS.
> Take off every deduction for great justice!
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l