[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

O2 Sensor and Resistance



Resistance would increase, so voltage drop would also increase...we are
talking increments of .1 volts here.  So, lower voltage would indicate a
leaner mixture to the computer, so the computer would try to adjust the
mixture richer...

So, higher resistance = lower voltage = richer than idea mixture.

Marc
----- Original Message -----
From: "Brad Sterling" <bgsterling@earthlink.net>
To: "Scirocco List (E-mail)" <scirocco-L@scirocco.org>
Sent: Monday, March 11, 2002 11:28 AM
Subject: O2 Sensor and Resistance


> Hi all,
>
> I'm not looking to open the splice/solder debate again.  But if you were
to
> use one of those methods to replace your O2 sensor with the generic Ford
> sensor and mucked up the job, wouldn't it cause the resistance (talking
flow
> of electricity here) to increase?  If resistance increases and an
incorrect
> value were sent to the ECU, would the ECU make the car run rich or lean?
> TIA.
>
> -Brad
> '86.5 Scirocco 16v
> '76 International Scout II
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>