[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

What's the part # for the Corrado Master cylinder?



ATS - Patrick Bureau wrote:
> 
> Actually its a hot swap for ant MKII 85+ (answering the question)
> 
> On a MKI, I do beleive the Booster needs to be changed for a MKII 85+
> ON a MKI, I do beleive (depending on year also I think) you run into the
> brake signal (you have a 6 port M/C) and the G60 uses 4, because MKII85+ and
> Coraddo G60 use Brake pedal sensors for brake lights to be turned on. and
> that would be a problem if you have the 6 port M/C but I was told some time
> ago that you could find a rabbit (year unknown) that has the brake pedal
> sensors and simply cut the wire to the M/C brake ports sensors and just
> reqire them to the pedal cluster sesor adn the pedal cluster should (true
> for MKII 82-84) have a pre-drilled hoel for the location of the brake pedal
> sesors to be installed on.
> 
> if it makes little sence to you right now, s'ok I had 2 beer and it make
> complete sence to me :)
> 
> ATS - Patrick
> 


Thx. In response to the brake pedal issue: Cabriolet models are A1
chassis but have been upgraded with lots of the later fittings. Seems a
good source for a brake pedal.

TBerk