What's the part # for the Corrado Master cylinder?

[pbureau@attbi.com (ATS - Patrick Bureau)]

Actually its a hot swap for ant MKII 85+ (answering the question)

On a MKI, I do beleive the Booster needs to be changed for a MKII 85+
ON a MKI, I do beleive (depending on year also I think) you run into the
brake signal (you have a 6 port M/C) and the G60 uses 4, because MKII85+ and
Coraddo G60 use Brake pedal sensors for brake lights to be turned on. and
that would be a problem if you have the 6 port M/C but I was told some time
ago that you could find a rabbit (year unknown) that has the brake pedal
sensors and simply cut the wire to the M/C brake ports sensors and just
reqire them to the pedal cluster sesor adn the pedal cluster should (true
for MKII 82-84) have a pre-drilled hoel for the location of the brake pedal
sesors to be installed on.

if it makes little sence to you right now, s'ok I had 2 beer and it make
complete sence to me :)

ATS - Patrick


=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of T Berk
=>Sent: Thursday, March 07, 2002 9:02 PM
=>Cc: scirocco-l@scirocco.org
=>Subject: Re: What's the part # for the Corrado Master cylinder?
=>
=>
=>josh Wyte wrote:
=>>
=>> Hey guys,
=>>
=>> Need the part # for the non-abs corrado g60 master
=>> cylinder.
=>>
=>> TIA!
=>>
=>> -josh
=>>
=>
=>
=>And just to be clear: This is a 16v swappable part, but wont just swap
=>out on a 81 Scirocco would it? (That's a Question, btw.)
=>
=>I'm thinking I'd need to swap the booster, brake cluster, etc.
=>
=>Well, I have an A2 GTI to work with, any hope for me yet?
=>
=>TBerk
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l