WAS: 1-3 gears I'm all over the place! NOW: Intermediate shaft

[maardak@yahoo.ca (Mardak)]

--- LXVTEC@aol.com wrote:
> Mark,
> They don't use an intermediate shaft from an Accord unless it is an
> Accord 


Yeah, the swap I'm referring to incorporated an Accord tranny...


> tranny. I have done several Honda swaps. the Integra, Prelude, Accord
> motors 
> all have intermediate shafts. they are stock from Honda. So unless
> you feel 
> like making a casting or spending a lot of time on a lathe then have
> fun 
> making an intermediate shaft. After you have one completed and can


I love spending a lot of time on a lathe!  As I mentioned, I'm still at
the idea stage of (non!)development.  My thoughts were to perhaps use
the Honda piece and modify it (although I haven't seen one close enough
to even see if this is a remote possibility...)  It's been something
tumbling around my head for the last while, so we'll see what happens
when I actually get around to making a prototype...  By all means,
though, if you have any suggestions, I'd love to hear them...

Mark.

  



______________________________________________________________________ 
Find, Connect, Date! http://personals.yahoo.ca