[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Linkage

Oh it is, but I have come up with a mod that will keep it from slipping.
Re-adjust and bore a 1/4" hole through it.  Then use a gator pin to secure
it.  That would keep it from going bonkers.


Erik
88 16V
88 Golf (Urban Insult Vehichle)
----- Original Message -----
From: Larry <rocco16v@netzero.com>
To: jp43044 <jp43044@netzero.net>; <Scirocco-l@scirocco.org>
Sent: Sunday, June 30, 2002 1:26 AM
Subject: Re: Linkage


> If you have to re-adjust, look at the shifter shaft clamp.  Sounds like it
> may be slipping....
>
> Larry
>
> > If I can recall, I think I saw someone who had built a shift linkage kit
> > that used new rods and heim joints for the the A1's.  Who was that?  I
am
> > getting tired of re-adjusting my shifter after a few power shifts.
> > Erik
> >
>
>