[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cam gears

I ended up taking mine to the local machine shop when I put the Autotechs
in. (which set are you using, BTW?)

The guy at the shop said that I was probably better off for bringing them to
him because the Autotechs didn't have the groove where the sprocket sits
ground into them (he did it for me, $40 for the whole thing).

Also, Craig lent me his stock cams to transfer the gears to my Autotechs to
minimize my downtime. I still have them and he might be willing to let you
continue the "musical cams"....

LMK, JT
----- Original Message -----
From: "Euroroc II" <flaatr@yahoo.com>
To: <scirocco-l@scirocco.org>
Sent: Wednesday, June 19, 2002 1:29 PM
Subject: Cam gears


> Any advice on how to remove these gears (one on each cam not the one for
> the timing belt) on the 16V cam shafts.
>
> I don't have a press readily available
>
> -Raffi
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l