Turbo Project

[jdbubb@ix.netcom.com (Dan Bubb)]

www.burnstainless.com
www.force-efi.com

Burns can supply stainless and aluminum straight, u-bends, j-bends whatever
(including inconel, titaniium!!)The bends are mandrel bent.  They are NOT
cheap.
Force supplies aluminum pieces, but they get it from Burns and proably don't
stock it.
For regular old steel mandrel bent tube (that is not aluminized which effs
up welds!!) try J.C. Whitney.
For silicone hose and clamps:
www.roadraceengineering.com
www.turboneticinc.com

turbonetics is generally non-responsive and roadrace is paranoid about
credit card abuse which makes the first order a hassel.
I wouldn't use straight tubing with silicone bends cause the silicone bends
are very tight.
This is all just my opinion based on the limited dealings I've had with the
above companies.
Dan



----- Original Message -----
From: Neal Tovsen <nealtovsen@yahoo.com>
To: 'Sebastian Liberona' <smash593@shaw.ca>; 'Scirocco List'
<scirocco-l@scirocco.org>
Sent: Thursday, June 13, 2002 1:02 PM
Subject: RE: Turbo Project


> Looks good! Clean install. Definitely let us know how it is to drive
> once you get everything ironed out, or if you get dyno charts...
>
> If I may ask:
>
> Real question: Where did you get the tubing for the boost tubes? Is it
> steel or aluminum? Has it worked well for you? I need to build custom
> boost tubes for my G60 project, and it looks like you've done just what
> I was thinking. I haven't yet found a source for pre-mandrel-bent tubing
> of various diameters or angles.  Technically, I could use aluminum, but
> I'd probably prefer steel for now. I have a MIG welder that claims to be
> able to do aluminum, but I'm sure steel would be plenty enough of a
> challenge for my amateur skills! I'm also considering silicon elbows
> with straight aluminum tubes, but haven't found a great source for that
> either.
>
> Just 'cause I'm curious:
> What fuel mgmt are you using?
> What kinds of "bugs" are you experiencing?
>
> Neal
>
> > -----Original Message-----
> > From: scirocco-l-admin@scirocco.org
> > [mailto:scirocco-l-admin@scirocco.org] On Behalf Of Sebastian Liberona
> > Sent: Thursday, June 13, 2002 12:22 PM
> > To: Scirocco List
> > Subject: Turbo Project
> >
> >
> > I just finished my turbo project scirocco 16v. got some bugs
> > to work out tho. boost tubes look like shit i already know.
> > anyways here are the pics
> >
> http://members.shaw.ca/smash593/turbo/
>
>
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org http://neubayern.net/mailman/listinfo/scirocco-l
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l