[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

more info on PP bolts--Foxxinabox better read this



you are not serious about liking them are you?  Aside from Foxx i have not
had any fond memories with MAG.  I had one heck of fiasco with getting my
recalled gas tank fixed.  Stan (Svc MGR) told me he would not touch my car
and to come and get it.

Joshua Conner
Verizon Wireless
Dublin Customer Care
ext. 6165
coolj@vtext.com


-----Original Message-----
From: jp43044 [mailto:jp43044@netzero.net]
Sent: Tuesday, July 30, 2002 2:37 AM
To: Dan Miller; scirocco-l@scirocco.org
Subject: Re: more info on PP bolts--Foxxinabox better read this


God Bless MAG.  How could anyone not love those guys?  I get alot of dirty
looks from them when I drive the Golf up there.  I think it blends right in
with the Bently's, Rolls', and Ferrari's.
Erik
88 16V
88 Golf (Urban Insult Vehichle)
----- Original Message -----
From: Dan Miller <legalizit@hectorite.i-p.com>
To: <scirocco-l@scirocco.org>
Sent: Monday, July 29, 2002 5:06 PM
Subject: more info on PP bolts--Foxxinabox better read this


> Yes, they are (WERE now) brand spanking new
> bolts from my nearest VW dealer with loctite
> already on them from teh dealer.  I applied some
> red loctite to complement the blue loctite that the
> dealer already had on teh bolts, and did let them
> set before i installed them.  I also torqued them
> down in a star pattern per bentley.  The first time it
> happened was my fault-- i failed to see the blurb,
> this very very important blurb in my bentley manual
> about replacing these deformable bolts.  The
> dealer (Midwestern Auto Group) also failed to
> notify me of this....eh hem no names (Darn you
> Ira!!) mentioned...   There was some slight metal
> transfer to teh crank when it first happened but my
> mechanic thought it was not significant enough to
> interfere with anything. I have yet to pull teh tranny
> down again to assess teh current damage.
> Knowing that i will now probably have to get a new
> crank, anyone have a spare lying around or know
> where i can get a salvage/ new part for cheap?
> How difficult is it to install a new crankshaft?  I just
> cant figure out why teh hell brand new bolts with
> both red and blue loctite that were properly
> torqued would back out.  One good thing has
> come out of this: i can remove and reinstall my
> tranny in jsut about 4 hours.  Anyone need help
> with a clutch job?-- ! => again send reply to
> legalizit@hectorite.i-p.com <= !
>
> Dan Miller
>
> --
>
> ......................
>
>
>
>
>
>
> Powered by Instant Portal
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>

-------------------------------------------
Introducing NetZero Long Distance
Unlimited Long Distance only $29.95/ month!
Sign Up Today! www.netzerolongdistance.com

_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l