My rocc plows now!

[Larry" <rocco16v@netzero.com (Larry)]

Interesting, considering that adding a rear bar should make the car 'loose'
(oversteer), instead of 'tight' (understeer/plow).  Besides the springs and
strut brace, what else did you change?  We assume it didn't plow under
identical conditions of road, throttle, dryness, speed, etc. before these
modifications?

Larry

>
> Hey everybody,
>
> Heres the situation, My 86 8v has Intrax lowering springs, An upper strut
> tie bar and now a 28mm sway bar in the back.  I knew that it would screw
up
> my handling a little bit if I put on the sway bar, but I'm not sure what
to
> do now to fix it.  What happens exactly is if I try to power it through a
> corner the front end floats and drifts to the outside.  Its fine if I just
> drift through a corner without using too much gas, but thats no fun!  How
> the hell do I fix this?  A beefier front swaybar?
>
> Thanks
> Dan
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>

-------------------------------------------
Introducing NetZero Long Distance
Unlimited Long Distance only $29.95/ month!
Sign Up Today! www.netzerolongdistance.com