HELP NEEDED ASAP!!! ARP rod bolts...

[roccolister@hotmail.com (Craig Williams)]

I don't recall the size, but I remember using my 12 pt. metric set to do the 
job and not having a problem.

-- Craig



>From: <joshhignight@techography.net>
>To: Scirocco List <scirocco-l@scirocco.org>
>Subject: RE: RE: HELP NEEDED ASAP!!! ARP rod bolts...
>Date: Sat, 20 Jul 2002 10:29:54 -0400
>
>These are rod studs. They aren't 10mm (too big), nor are they 9mm (too 
>small). 3/8 is too large, but 5/16 is too small. Next up is 11/32 if I'm 
>thinking right (or 9.5mm, if such a thing exists).
>
>Joshua
>
>
>Original Message -----------------------
>I am not sure, but I do believe the ARP bolts kit heads are metric size,
>most likely a 13 no ?
>
>==========================================
>ATS - Patrick Bureau
>ATS - Patrick Bureau
>1985 8v **Planning 3A/JH  Upgrade**
>1985 8v  ** Titian Project **
>1988 16v ** Sold **
>Web Site : http://longcoeur.com/scirocco
>
>
>=>-----Original Message-----
>=>From: scirocco-l-admin@scirocco.org
>=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of
>=>joshhignight@techography.net
>=>Sent: Saturday, July 20, 2002 8:56 AM
>=>To: Scirocco List
>=>Subject: HELP NEEDED ASAP!!! ARP rod bolts...
>=>
>=>
>=>   I'm in the process of trying to fix my block (pistons rotated
>=>180* from where they should be). It has ARP rod bolts. I can't
>=>find a wrench to fit the rod bolt nuts (I'm thinking 11/32 8
>=>point, but not sure). Also, I need to know the torque spec to
>=>tighten them back to as well. If anyone can help, please reply ASAP!
>=>
>=>Thanks.
>=>
>=>
>=>_______________________________________________
>=>Scirocco-l mailing list
>=>Scirocco-l@scirocco.org
>=>http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l




_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com