S16v axles into Mk1: must change spindles? really?

[roccolister@hotmail.com (Craig Williams)]

I've got 16V 100mm CV's in my '81 and made NO mods to get that done. The 
outer clip for the outer CV bots is really close to the sway bar, but 
nothing interferes with anything. I've had them running like this for over 
10 years.

-- Craig


>From: "Scott F. Williams" <sfwilliams@comcast.net>
>To: Scirocco List <scirocco-l@scirocco.org>
>Subject: S16v axles into Mk1: must change spindles? really?
>Date: Mon, 15 Jul 2002 21:03:47 -0400
>
>Hey, is what I'm hearing true that in order to use S16v axles in an early
>car you have to change the spindles as well as the drive flanges? Obviously
>the flanges have to swapped to fit the 100mm inner CVs. But, is it also
>correct that the bigger outer CVs will foul the early spindles? This is the
>first that I'm hearing of this.
>
>Somebody please verify. Thanks.
>--
>Scott F. Williams
>NJ Scirocco nut
>'99 Subaru Impreza 2.5 RS
>Mazda 323 GTX turbo "assaulted" vehicle
>Golf GTI 16v "rollycar"
>ClubVAC: "Roads found. Drivers wanted."
>
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l




_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx