100MM axles into 90M hubs.

[jason_f_snow@nac.net (Jason F. Snow)]

Get the 16v hub carriers from a junkyard, replace your bearings and
seals and be done with it. I'm a big talker when it's someone else's
money, but seriously that's what I did to my 81. Fortunately my 87 16v
already had a 4k with the 100mm flanges already done. That tranny is now
in the 81 and it has been converted to the 16v suspension and brakes and
such...Good luck...

Jason

-----Original Message-----
From: scirocco-l-admin@scirocco.org
[mailto:scirocco-l-admin@scirocco.org] On Behalf Of Allyn
Sent: Saturday, July 13, 2002 8:20 AM
To: LXVTEC@aol.com; scirocco-l@scirocco.org
Subject: Re: 100MM axles into 90M hubs.

it can be done if its a late enough model. if they dont fit you would
have to machine a portion of
the inner lip of the hub (where the outer cv housing contacts it).
Al

----- Original Message -----
From: <LXVTEC@aol.com>
To: <scirocco-l@scirocco.org>
Sent: Friday, July 12, 2002 9:02 PM
Subject: 100MM axles into 90M hubs.


> List,
> Can you use 100MM axles in 90MM hubs? What has to be done to get them
to fit.
> Masun Dixon
> 78 Scirocco 16V
> 87 Scirocco 16V
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l