removed A/C - Waterpump pulley

[brianm@earendel.org (Brian McGarvey)]

anytine you depend on friction for a critical joint. you run the risk of
the joint failing... Take it and get another pully or get it tack welded.
should cost very little.
brian.
2.0L topless bunny...
90 quattro 20v..
88 16v
91 750cc V-4 goes waaay to fast.
hmm need another addition...

On Wed, 3 Jul 2002, Ken B wrote:

> Standard Scirocco 16v motor removed A/C and P/S.
> I am using the inner pulley on my water pump with the crank and the alt w/
> the longer pulley.  They line up very close but the problem is that the
> Outer pulley is the one that drives the water pump.  No matter how tight the
> 6mm allen bolts are, the inner one still turns but not the outer...meaning
> no water pumping.
> I have seen posts that say they have had the two spot welded together.  Any
> other way?  Maybe a flat ring like shim that could transfer pressure from
> the other pulley?
>
> Ken
> 1979 Scirocco  "McFly"
> 16v conversion "...it's working....It's WORKING...!"
> tracing electrical gremlins now...
> VORTEX:  "Indiana Red"
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>