M.C.

[pbureau@attbi.com (ATS - Patrick Bureau)]

89.95$ sorry al, local vwdub shop around my place for a NEW one.

Patrick


=>-----Original Message-----
=>From: Allyn [mailto:amalventano1@home.com]
=>Sent: Friday, January 25, 2002 2:53 PM
=>To: ATS - Patrick Bureau; _Scirocco Mailing List
=>Subject: Re: M.C.
=>
=>
=>Patrick,
=>    Where is this mc at for $80? and does it bolt up? also, what
=>mods are necessary to bolt it up to
=>an 8v setup? should i swap the vacuum cylinder as well?
=>Al
=>
=>----- Original Message -----
=>From: "ATS - Patrick Bureau" <pbureau@attbi.com>
=>To: "_Scirocco Mailing List" <scirocco-l@scirocco.org>
=>Sent: Friday, January 25, 2002 12:58 PM
=>Subject: RE: M.C.
=>
=>
=>> As I figured out (using etka) is that the Coraddo G60 NON ABS
=>is the same
=>> stroke as the 16v, but the bore s such that it actually applies more
=>> pressure to each line and there for remove "soft break),
=>besides the 16v is
=>> 140$ and the G60 is 80$. I'm part cheapass (since I actually
=>had breakfast
=>> with him a few mont back) and it all made sence to me.
=>>
=>> Patrick
=>>
=>>
=>> =>-----Original Message-----
=>> =>From: Neal Tovsen [mailto:nealtovsen@yahoo.com]
=>> =>Sent: Friday, January 25, 2002 11:24 AM
=>> =>To: LXVTEC@aol.com; pbureau@attbi.com; Josh.Hignight@phoenix.edu;
=>> =>scirocco-l@scirocco.org
=>> =>Subject: RE: M.C.
=>> =>
=>> =>
=>> =>What's up with using the G60 M/C? Is it better than the 16v?
=>> =>
=>> =>If I can't sell the whole rolling car (minus engine) by
=>sometime in March,
=>> =>I'm parting out my Corrado...might as well keep the good stuff, right?
=>> =>
=>> =>Neal
=>> =>
=>> =>> -----Original Message-----
=>> =>> From: scirocco-l-admin@scirocco.org
=>> =>> [mailto:scirocco-l-admin@scirocco.org]On Behalf Of LXVTEC@aol.com
=>> =>> Sent: Friday, January 25, 2002 2:33 AM
=>> =>> To: pbureau@attbi.com; Josh.Hignight@phoenix.edu;
=>> =>> scirocco-l@scirocco.org
=>> =>> Subject: Re: M.C.
=>> =>>
=>> =>>
=>> =>> Patrick,
=>> =>> I use the exact same brake fluid in my MK1 with 16V
=>> =>> conversion. it works
=>> =>> great and have not noticed it boiling. I got it for like $4
=>> =>> at Autozone for
=>> =>> the big bottle to change the MC and bleed the brakes and some
=>> =>> left over. I
=>> =>> plan to use this brake fluid in my 16V when I do my SS brakes
=>> =>> lines, G60
=>> =>> non-ABS MC and 11" Corrado front brakes as soon as I get my
=>> =>> new tires for my
=>> =>> Corrado G60 wheels.
=>> =>> Masun Dixon
=>> =>> 78 Scirocco 16V
=>> =>> 87 Scirocco 16V
=>> =>>
=>> =>> _______________________________________________
=>> =>> Scirocco-l mailing list
=>> =>> Scirocco-l@scirocco.org
=>> =>> http://neubayern.net/mailman/listinfo/scirocco-l
=>> =>
=>> => _________________________________________________________ Do You
=>> =>Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
=>> =>
=>>
=>>
=>> _______________________________________________
=>> Scirocco-l mailing list
=>> Scirocco-l@scirocco.org
=>> http://neubayern.net/mailman/listinfo/scirocco-l
=>
=>