[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

M.C.

I think Patrick got a rebuilt from autozone. And no it is a direct bolt on 
no booster change. Its all good.

Brian


>From: "Allyn" <amalventano1@home.com>
>To: "ATS - Patrick Bureau" <pbureau@attbi.com>, "_Scirocco Mailing List" 
><scirocco-l@scirocco.org>
>Subject: Re: M.C.
>Date: Fri, 25 Jan 2002 15:52:30 -0500
>
>Patrick,
>     Where is this mc at for $80? and does it bolt up? also, what mods are 
>necessary to bolt it up to
>an 8v setup? should i swap the vacuum cylinder as well?
>Al
>
>----- Original Message -----
>From: "ATS - Patrick Bureau" <pbureau@attbi.com>
>To: "_Scirocco Mailing List" <scirocco-l@scirocco.org>
>Sent: Friday, January 25, 2002 12:58 PM
>Subject: RE: M.C.
>
>
> > As I figured out (using etka) is that the Coraddo G60 NON ABS is the 
>same
> > stroke as the 16v, but the bore s such that it actually applies more
> > pressure to each line and there for remove "soft break), besides the 16v 
>is
> > 140$ and the G60 is 80$. I'm part cheapass (since I actually had 
>breakfast
> > with him a few mont back) and it all made sence to me.
> >
> > Patrick
> >
> >
> > =>-----Original Message-----
> > =>From: Neal Tovsen [mailto:nealtovsen@yahoo.com]
> > =>Sent: Friday, January 25, 2002 11:24 AM
> > =>To: LXVTEC@aol.com; pbureau@attbi.com; Josh.Hignight@phoenix.edu;
> > =>scirocco-l@scirocco.org
> > =>Subject: RE: M.C.
> > =>
> > =>
> > =>What's up with using the G60 M/C? Is it better than the 16v?
> > =>
> > =>If I can't sell the whole rolling car (minus engine) by sometime in 
>March,
> > =>I'm parting out my Corrado...might as well keep the good stuff, right?
> > =>
> > =>Neal
> > =>
> > =>> -----Original Message-----
> > =>> From: scirocco-l-admin@scirocco.org
> > =>> [mailto:scirocco-l-admin@scirocco.org]On Behalf Of LXVTEC@aol.com
> > =>> Sent: Friday, January 25, 2002 2:33 AM
> > =>> To: pbureau@attbi.com; Josh.Hignight@phoenix.edu;
> > =>> scirocco-l@scirocco.org
> > =>> Subject: Re: M.C.
> > =>>
> > =>>
> > =>> Patrick,
> > =>> I use the exact same brake fluid in my MK1 with 16V
> > =>> conversion. it works
> > =>> great and have not noticed it boiling. I got it for like $4
> > =>> at Autozone for
> > =>> the big bottle to change the MC and bleed the brakes and some
> > =>> left over. I
> > =>> plan to use this brake fluid in my 16V when I do my SS brakes
> > =>> lines, G60
> > =>> non-ABS MC and 11" Corrado front brakes as soon as I get my
> > =>> new tires for my
> > =>> Corrado G60 wheels.
> > =>> Masun Dixon
> > =>> 78 Scirocco 16V
> > =>> 87 Scirocco 16V
> > =>>
> > =>> _______________________________________________
> > =>> Scirocco-l mailing list
> > =>> Scirocco-l@scirocco.org
> > =>> http://neubayern.net/mailman/listinfo/scirocco-l
> > =>
> > => _________________________________________________________ Do You
> > =>Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
> > =>
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l


_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com