[TECH HELP NEEDED] Brake hoses Question

[marc_scirocco@yahoo.ca (Marc scirocco Québec)]

Explanation: look at illustration 119-00
Caliper carrier (item 5 - part 443-615-425 A) are
bolted solid to the rear axle via bolts (item 6 - part
N619-912-3)

Tha calipers themselves (item 4 - part 191-615-423A)
have to be able to slide a little bit on the bolts
included with the calliper carriers (top bolts) to
compensate for wear, and by the nature of disks brakes
themselves.

Now go to 115-30, items 11-12. If you look at part
numbers: first listing for items 11-12 (191-611-994D)
is for regular Sciroccos (drum brakes), and the second
listing for items 11-12 (191-611-994E) is for 16V, and
just below, you will see part number "893-611-775A
Brake Hose". They are not shown on the drawing, but
they sure are there.

Once you eyeball a rear axle with disk brakes, you'll
see...

Cheers.

Marc
'83 Scirocco
'88 Scirocco Slegato

 --- ATS - Patrick Bureau <pbureau@attbi.com> a écrit
: > 

> are the Brake Hoses, I am considering the S/S Hoses
> (if I can find a local
> dealer.)
> and I have searched the web and ever where they
> indicate 8v = 4 hoses, 16v =
> 6 hoses.
> 
> now I looked at Sci-88-6-11-114-00 and 115-30 of the
> etka and I can only see
> 4 hoses.
> (part # 171-611-701L (front) x2, and 433-611-775A x2
> (Rear))
> 
> what are the other 2 hoses for ? where do they run
> from/to ? part # ? so I
> can visualize this..
> 
> 
> Hellllp!
> 
> ATS - Patrick Bureau

__________________________________________________________
Obtenez votre adresse @yahoo.ca gratuite et en français !
courriel.yahoo.ca