[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Peloquin shim kit DIY...



The last 80% kit I put in had 2 metal spacer shims, 2 replacement and
possibly heavier designed brass rings and some fancy inner flange seals.


----- Original Message -----
From: "Dan Bubb" <jdbubb@ix.netcom.com>
To: <jester@westfailure.net>; <scirocco-l@scirocco.org>
Sent: Sunday, February 17, 2002 8:26 AM
Subject: Re: Peloquin shim kit DIY...


> I think the Peloquin kit also includes some really strong flange
tensioning
> springs.
>
> ----- Original Message -----
> From: <jester@westfailure.net>
> To: <scirocco-l@scirocco.org>
> Sent: Sunday, February 17, 2002 10:02 AM
> Subject: Peloquin shim kit DIY...
>
>
> > Hi all,
> >
> > I was wondering...
> >
> > Is the peloquin diff kit a shim behind the stock friction thing, or is
it
> > a new thicker friction thing?
> >
> > Either way if someone has one, could you measure the thickness of the
shim
> > or piece as compared to a stock one.
> >
> > I think it'd be easy enough to make a steel or aluminum shim out of shim
> > stock to throw in behind the stock friction thing to increase the
pressure
> > and have the same thing for next to free :)
> >
> > take care,
> >
> > Steve
> >
> >
>
***************************************************************************
> >              Fashion Twins, activate! form of: a lemming.
> >                       http://westfailure.org
> >
>
***************************************************************************
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l