[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

oil pumps

just slap it in there!

Botch it you clown.


Josh Able

----- Original Message ----- 
From: "Paul Maione" <paulmaione@videotron.ca>
To: <scirocco-l@scirocco.org>
Sent: Saturday, February 02, 2002 8:26 PM
Subject: oil pumps


> hey everyone.
> 
> i'm putting my motor back together and i started
> buying new parts. i called up my parts supplier and
> asked about a new oil pump and i was quoted a price
> of $200 cdn. yikes.
> this other guy i work with just finished his 2L 8v rabbit and
> his oil pump was $60. i checked his old one which was
> lying around and bingo, it had the same part number. the
> things about it that are different are the shafts that go up
> into the block. his has a notch for the distributor and mine
> has the splines for the intermediate shaft. i took mine and
> his apart and just basically replaced the shaft from the 8v
> with the 16v and everything went back together.
> 
> does this make sense and would it work? i'm kinda
> worried about slapping it together this just isn't meant
> to be. are there any differences between them other than
> that shaft?
> 
> thanks
> 
> 
> paul 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>