[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tie rod help pleas



This is a multi-part message in MIME format.

------=_NextPart_000_000A_01C29F56.B76B6DB0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Actually it is rather easy.

1) Jack Up Car
2) Remove wheel
3) Remove outer tierod end and jam nut
4) Remove Rack boot

Sounds like you have 1~4, now for the hard part

5) Extend the tierod into the wheel well you are working on, look close =
at the back end of the tierod where it meets the the rack bar. You will =
notice that is basically a large bolt head either 30mm or 32mm can't =
remember for sure.
6) take your wrench and slide it in the gap directly below the tie rod =
end (that is the gap between the control arm and horn. You can remove =
the control arm but I have found no need to do so.
7)remembering righty tighty and lefty loosey, start removing the inner =
tie rod. There is no jam nut on the inner so put a little penetrating =
oil on it.=20

It will be a little tough at first but be patient, the is red lock tight =
on the threads.

Reverse procedure to install.

Walla

Brian
  ----- Original Message -----=20
  From: Sebastian=20
  To: scirocco-l@scirocco.org=20
  Sent: Monday, December 09, 2002 1:35 AM
  Subject: Tie rod help pleas


  I still havent gotten any real help, has anyone here actuall replaced =
the inner tie rods on a scirocco 16v with power steering? please email =
me i really need the help. thanks
------=_NextPart_000_000A_01C29F56.B76B6DB0
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1126" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Actually it is rather =
easy.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>1) Jack Up Car</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>2) Remove wheel</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>3) Remove outer tierod end and jam =
nut</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>4) Remove Rack boot</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Sounds like you have 1~4, now for the =
hard=20
part</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>5) Extend the tierod into the wheel =
well you are=20
working on, look close at the back end of the tierod where it meets the =
the rack=20
bar. You will notice that is basically a large bolt head either 30mm or =
32mm=20
can't remember for sure.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>6) take your wrench and slide it in the =
gap=20
directly below the tie rod end (that is the gap between the control arm =
and=20
horn. You can remove the control arm but I have found no need to do=20
so.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>7)remembering righty tighty and lefty =
loosey, start=20
removing the inner tie rod. There is no jam nut on the inner so put a =
little=20
penetrating oil on it. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>It will be a little tough at first but =
be patient,=20
the is red lock tight on the threads.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Reverse procedure to =
install.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Walla</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Brian</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV=20
  style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
  <A title=3Dsmash593@shaw.ca =
href=3D"mailto:smash593@shaw.ca";>Sebastian</A> </DIV>
  <DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dscirocco-l@scirocco.org=20
  href=3D"mailto:scirocco-l@scirocco.org";>scirocco-l@scirocco.org</A> =
</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Monday, December 09, 2002 =
1:35=20
  AM</DIV>
  <DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Tie rod help =
pleas</DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=3DArial size=3D2>I still havent gotten any real help, =
has anyone=20
  here actuall replaced the inner tie rods on a scirocco 16v with power=20
  steering? please email me i really need the help.=20
thanks</FONT></DIV></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_000A_01C29F56.B76B6DB0--