Which source for oil PSI & Temp sender?

[pbureau@attbi.com (ATS - Patrick Bureau)]

=>Also, if the head IS getting lubed, then of course the bottom end is too.
=>

Wel if the return passage of oil are blocked you would find a nice high
pressure into the head, and starvation at the pump (oil pressure running
high and oil light on), I have experienced this once, just before a piston
locked up....nasty stuff.


-------------------------------------------------------
    __  __________
   /  |/_ __/ ___/ Patrick Bureau
  //| | / / \__ \  1985 8v Prowler Orange "Beatrice"
 / _  |/ / ___/ /  1985 8v Titian Red "Lucky"
/_/ |_/_/ /____/   http://www.longcoeur.com/scirocco

=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of
=>joshhignight@techography.net
=>Sent: Friday, August 30, 2002 5:52 AM
=>To: Scirocco List
=>Subject: RE: Re: Which source for oil PSI & Temp sender?
=>
=>
=>Hold on a second there. Closed system yes, but only the "sending"
<snip!>