H&R G Springs

[amalventano1@comcast.net (Allyn)]

> Can anybody answer my question about the A arm angle?  At what suspension
> height is the arm horizontal?

the rieger (16v with 16v softsports), sits about an inch below where the arms would be straight out
(i.e. they are pointed up slightly). im guessing that since softsports lower by about an inch, stock
springs should have them perfectally straight. lowering springs will make the arms point upwards
somewhat. its when you get too far past that point that you get drastic changes in toe for a given
change in height (i.e. bump steer).

Al