[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

opinions on poly bushings- and where do you get them?



--part1_105.19e3bd21.2a82b5d3_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Rob,
I just did new A-arms, balljoints, bearings, and bushings on my 87 16 V. I am 
running Bilstein Sports and Hor springs. I noticed the ride didn't change 
much except that the front feels much tighter. I got everything from Potter. 
I have the complete rear poly bushing set just haven't had time to install 
it. I personally think if it is a daily driver for the spirited driver then 
Poly is the way to go. Delrin is for the racer and doesn't give much room for 
play that is needed on the road. I have the poly front motor mount and poly 
filled passenger motor mount as well.
HTH
Masun Dixon
78 Scirocco 16V
87 Scirocco 16V

--part1_105.19e3bd21.2a82b5d3_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

<HTML><FONT FACE=arial,helvetica><FONT  SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">Rob,<BR>
I just did new A-arms, balljoints, bearings, and bushings on my 87 16 V. I am running Bilstein Sports and Hor springs. I noticed the ride didn't change much except that the front feels much tighter. I got everything from Potter. I have the complete rear poly bushing set just haven't had time to install it. I personally think if it is a daily driver for the spirited driver then Poly is the way to go. Delrin is for the racer and doesn't give much room for play that is needed on the road. I have the poly front motor mount and poly filled passenger motor mount as well.<BR>
HTH<BR>
Masun Dixon<BR>
78 Scirocco 16V<BR>
87 Scirocco 16V</FONT></HTML>

--part1_105.19e3bd21.2a82b5d3_boundary--