Volumetric Efficency of a JH VW engine

[amalventano1@comcast.net (Allyn)]

do you know the difference in thickness? are you doing this on a 16v or an 8v?
Al

----- Original Message ----- 
From: "Sebastian Liberona" <smash593@shaw.ca>
To: "Scirocco List" <scirocco-l@scirocco.org>
Sent: Sunday, April 14, 2002 3:10 PM
Subject: Re: Volumetric Efficency of a JH VW engine


> yes it should they are both 1.8L and i have been told it will, im goin to
> use a special thick g60 headgasket to lower my Compression for boost.
> 
> ----- Original Message -----
> From: "Allyn" <amalventano1@comcast.net>
> To: "Curtis" <schofiel@telusplanet.net>; "Scirocco List"
> <scirocco-l@scirocco.org>
> Sent: Sunday, April 14, 2002 10:59 AM
> Subject: Re: Volumetric Efficency of a JH VW engine
> 
> 
> >     Im not sure on the g60 gasket, but the VE for a stock 16v 1.8 peaks at
> about 90% at ~4500 rpm.
> > (the VE curve looks almost identical when compared to the torque curve).
> >
> > Question from me: does the g60 head gasket bolt up to a 16v with no
> problems?
> >
> > Al
> >
> > ----- Original Message -----
> > From: "Curtis" <schofiel@telusplanet.net>
> > To: "Scirocco List" <scirocco-l@scirocco.org>
> > Sent: Sunday, April 14, 2002 1:51 PM
> > Subject: Volumetric Efficency of a JH VW engine
> >
> >
> > > Does anyone have numbers on this?
> > >
> > > Also how much will a Corrado G90 headgaset conversion
> > > lower the compression ;)
> > >
> > > Curtis
> > >
> > >
> > >
> > > _______________________________________________
> > > Scirocco-l mailing list
> > > Scirocco-l@scirocco.org
> > > http://neubayern.net/mailman/listinfo/scirocco-l
> >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l