Re: mogrel 88 1.6 fuel pump issue (long)

["Dave Ewing" <rabbit16v@prodigy.net>]

It all depends on what you installed for a fuel system/ignition system.  If
you installed the systems from the MK1 then wire up the pumps the same way
the MK1 is except you'll have to wire up two pumps instead of one.

This car is going to be a real oddity!!!  Good idea though!!  I guess I have
never parted out a car that was streetable!

Dave



> I stripped a 88 16v  (motor,brakes,m/cyl,rear axle,trans) to upgrade my
80S
> and made a deal to sell the 88 with all the old parts swapped in.My
neighbor
> needed a cheap second car.Anyway its all ready to run exept that the fuel
> pump on the 88 wants a signal from the knock sensor that isnt
> there.According to the bentley for the 80, this wire(the one that switches
> the fuel pump relay) would go to the negative side of the coil.When I try
> this on the 88,it makes the relay click with the disteibuter pulses(like
the
> tach.)If your still with me, how do I send the appropriate signals to the
> fuel pump relay with no knock sensor? Do I have to wire in the relay from
> the 80 (fuse on top) or is there another way? thank you, Robert
>
> ---------------------------------------------------------------
> NetZero Platinum
> Only $9.95 per month!
> Sign up in September to win one of 30 Hawaiian Vacations for 2!
> http://my.netzero.net/s/signup?r=platinum&refcd=PT97
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org