Re: motronic "power stage"?

[Paul Maione <paulmaione@videotron.ca>]

>I was just reading the .org tech procedure, and it mentions that you would 
>need the motronic "power stage" to convert Jetronic to Motronic.  What 
>exactly is this?

it kicks in when your car reaches a certain RPM and starts blasting
the coil for juice. it has a 3 prong plug that comes from the computer
to a plug on the braket for the coil. out of that plug are two wires for
the coil. red and blue.

>Also, I was wondering if anyone had ever tried to rig a Jetronic idle 
>stabilizer valve to work with motronic.  I figured it might be worth a shot 
>since the motronic one is simpler than the jetronic one (2 wires as opposed 
>to 3).  I'll check the bentley...

i don't get it.
you wanna set up a Jetronic idle stabilizer with a motronic conversion?
it's the
motronic one that has two wire. the cis-e on has 3. everything on the motronic
works with the computer. if your idle stabilizer isn't sending the right
signal to
the computer, it won't run right. use the motronic one if you have it. 

paul
87' scirocco16v

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org