Re: [RE: HELP! Sunroof Trim Problem]

[Cathy Boyko <losinit@usa.net>]

>
> BTW, will a too-high front or rear adjustment cause the
> top of the
> sunroof to scrape on the underside of the car's roof?  I
> got that goin'
> on....just haven't made the time to fix it yet.
>
> Thx,
>
> (Dumbass) Ron
>
>
>


Uh, that would be yup. Use some masking tape on the roof piece and gradually
ease it back when you first roll it back into the roof, (and check it at part
way back a few times before you crank it right in) that way you scratch the
tape before you get the paint (hopefully) Mine was off adjustment and it
wasn't the adjustment with the screws but that the roof itself was mounted too
high, there are those two (four?? it's been a while) paint colour tabs that
hold it to the rails if memory serves, use them to get the roof as tight down
as you can before levelling with the big screws as per Bentley. And tape on
the back edge of the hole to keep the coat hanger from scratching when you put
the spring back, gotta love that spring almost as much as the dissapearing c
clips. Have fun, Cathy

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org