[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [engine] pullin' injectors



It will take: 1)proper tool 2)more force than you are comfortable with!

Larry  sandiego16V

-----Original Message-----
From: Daniel Snow [mailto:danws69@earthlink.net]
Sent: Saturday, October 20, 2001 9:00 AM
To: roc (E-mail)
Subject: [engine] pullin' injectors


like it says....

I've never replaced the o-rings yet, but I'm about to.

I tugged on one (with some force) and it didn't budge.....so I'm asking
y'all.


TIA,

Dan
'87 16v 'Rocco
'81 Rabbit Sport Truck
'00 Jetta
Tam-pa, FL
http://home.earthlink.net/~danws69/index.html


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org

[Disclaimer]This e-mail is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional, or other privilege. If you are not the intended addressee you
must not use, disclose, or copy this transmission. This E-mail is not
intended to impose nor shall it be construed as imposing any legally binding
obligation upon GKN Aerospace Chem-tronics Inc. and/or any of its
subsidiaries or associated companies. Neither GKN Aerospace Chem-tronics
Inc. nor any of its subsidiaries or associated companies gives any
representation or warranty as to the accuracy or completeness of the
contents of this E-mail. GKN Aerospace Chem-tronics Inc. shall not be held
liable to any person resulting from the use of any information contained in
this E-mail and shall not be liable to any person who acts or omits to do
anything in reliance upon it.


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org