RE: Need Wipor Motor... or something (nevermind)

["Fry, Larry" <LEF@chem-tronics.com>]

Be careful.  If the nut came loose, letting the arm slip, then the spines
are most likely damaged.  Just keep that nut snug.......

Larry  sandiego16V 

-----Original Message-----
From: Tyler Pease [mailto:uberzip@home.com]
Sent: Wednesday, November 28, 2001 2:14 PM
To: List (E-mail)
Subject: RE: Need Wipor Motor... or something (nevermind)


Ok I went out there and checked it out and just had to tighten the nut, they
work fine now.  I hadn't looked at the wiper before and figure that was what
need done once I saw they are both driven by the same motor (makes sense).
Good think I always keep a healthy dose of Rain Slick on my windows so
driving home wasn't a prob.


[Disclaimer]This e-mail is strictly confidential and intended solely for the
addressee. It may contain information which is covered by legal,
professional, or other privilege. If you are not the intended addressee you
must not use, disclose, or copy this transmission. This E-mail is not
intended to impose nor shall it be construed as imposing any legally binding
obligation upon GKN Aerospace Chem-tronics Inc. and/or any of its
subsidiaries or associated companies. Neither GKN Aerospace Chem-tronics
Inc. nor any of its subsidiaries or associated companies gives any
representation or warranty as to the accuracy or completeness of the
contents of this E-mail. GKN Aerospace Chem-tronics Inc. shall not be held
liable to any person resulting from the use of any information contained in
this E-mail and shall not be liable to any person who acts or omits to do
anything in reliance upon it.


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org