Re: [partswanted] CV's

[mike <rept@qwest.net>]

I will be switching to 16V brakes- Shouldnt I just
switch the whole Knuckle then too?

T Berk wrote:
> 
> mike wrote:
> >
> > I have to buy the 100MM shafts-THEN maybe new
> > CV's,  But as I understand it I will need to make
> > the conversion from 90MM shafts anyway.?.?
> >
> 
> The Trans is what drives this: The later (like 16v) transaxles came with
> 100 mm. Early (like 81 Mk1) have 90 mm.
> 
> It is possible to:
> 
> - bolt in new engine with existing easily trans; same hubs, axles,
> flanges as before, 90 mm.
> 
> - bolt in new engine & trans from 16v, add 16 v axles, and 16v hubs.
> 
> - _Maybe_ hybrid w/ 100 mm on the trans, inner CVs & axles to smaller 90
> mm outer CVs & existing hubs. Maybe.
> 
> hth,
> TBerk

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org